rudra34 Posted March 28, 2017 Report Share Posted March 28, 2017 Heya! So I posted this in the Infinity pages, but it has a chance to get some more eyes on here. I'm putting together the display for our three-man team at this year's OFCC, making it the biggest hobby project that I've taken on in awhile. Here is the entirety of the post in the other forum: ---------- Alright! I took the day off and I'm getting a running start on the OFCC display board for Eric, Justin, and myself. This is the basic concept, poorly drawn by a poor artist. The basic plan is to have different levels for each army. The lower level will be for Justin's Haqq, living it up down below. The ground level will be for my Ariadna, and the raised platform will be fore Eric's Haqq. The idea is that each army will have it's own space to be shown off, but there will be coherency between the three within the setting. Getting the base level of foam cut and glued down Cutting a path for the pipe and sewer drain: Putting on the rest of the foam, and creating a half-pipe in the exposed half of the board using the rest of the pipe to shape foil over plaster: Plastering the whole thing to close gaps, texture, and make it safe for primer: That's all for now as there is a butt-load of plaster that needs to dry before it will be safe to work on any further. The rough ground will work fine for the ground level, but the lower level will get a layer of card stock over the foil. The platform is something that I'm gathering materials for, so the final design isn't decided yet. The main goal is that it has at least 48 square inches of space for models and some drop pieces. Any who, so far everything is going well, and I am looking forward to progressing further on the project! ---------- First question I have is if anyone knows of a good product for water effects. I've never had to do them on bases or terrain before, and I really don't want to f*** anything up with a bad product or bad knowledge of how it is used. Any other tips would be appreciated as this project continues, and thanks in advance! 9 Quote Link to comment Share on other sites More sharing options...
PourSpelur Posted March 28, 2017 Report Share Posted March 28, 2017 I've read about good results using clear silicone caulking for water effects. Paint the area to be covered in the pipe whatever colors you want the water to be, do the silicone over that and brush on clear gloss once dry. The clear gloss gives the shine, silicone adds depth and pre-painting the bottom of the pipe gives the colors. Being Infinity, I'd go for a toxic waste, florescent yellow-green personally;) 3 Quote Link to comment Share on other sites More sharing options...
rudra34 Posted March 28, 2017 Author Report Share Posted March 28, 2017 32 minutes ago, PourSpelur said: I've read about good results using clear silicone caulking for water effects. Paint the area to be covered in the pipe whatever colors you want the water to be, do the silicone over that and brush on clear gloss once dry. The clear gloss gives the shine, silicone adds depth and pre-painting the bottom of the pipe gives the colors. Being Infinity, I'd go for a toxic waste, florescent yellow-green personally;) Thanks! I'll look into it! 1 Quote Link to comment Share on other sites More sharing options...
rudra34 Posted March 28, 2017 Author Report Share Posted March 28, 2017 Overnight the board dried just fine with no cracks. The plaster under the foil is still wet and will probably take a few more days to a week to completely finish. Basically instead of looking like a pink cake it now looks like a white cake. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.