-
Posts
3,316 -
Joined
-
Last visited
-
Days Won
159
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by scottshoemaker
-
-
I'll have to get it on the bench and do a full workover on the z-axis. That seems the "most" likely at this point.
- 1
-
Those checked out ok. At first I though is was a tension issue, at least based on the delamination of the center models, but the support failures are pretty consistent on with the delam location, about 1/2" before the total fail. Whatever it is it has to be affecting the entire print and not just a portion of the plate/screen. I've had multiple models print before with a partial fail, such a one model delaming or pulling off the plate, but this has me baffled.
- 1
-
So I think I have an issue with my big printer. This is very consistent, I get 1-2 inches into the print and it’s almost like a layer or 2 just fails to expose. I’ve changed settings, changed FEP twice, changed that for nFEP, used different tensions, used PTFE lube, changed resins, temp controlled, sliced in multiple programs, updated firmware, you name it.
I finally got the print done on my little printer with the eco resin and creative positioning.
I’ll be shelving the problem child until I can circle back, I ordered a phrozen mighty to replace it for now.
-
-
-
5 hours ago, Yarbicus said:
I wasn't sure you did whole armies. PM sent!
Hell yes
-
I know a guy
- 3
-
-
43 minutes ago, Romans832 said:
Yep, something that simple and easy
https://www.thingiverse.com/thing:2446648
Or even as simple as:
The first one is too big for my printer, I can downscale about 15%
The other two are not a size issue.
- 1
-
If you would like a quote, shoot a DM over my way.
- 1
-
You mean something like this?
https://www.thingiverse.com/thing:2483037
I have neither designed nor printed a headset stand.
- 1
- 1
-
This designer has nice alternate demon models
https://cults3d.com/en/3d-model/game/outdated-medical-practitioners
- 2
-
I’m TY curious
- 2
- 1
-
Atari ST or GTFO
- 2
- 1
-
23 minutes ago, jollyork said:
EPIC!!!
Nope, standard 28mm
- 2
- 2
-
-
-
I'm dropping off an order, are there any request to see product?
-
-
-
-
Phrozen Water washable resin review.
TLDR I don’t like it.
pros: nicely thin, not too viscous at all not terribly stinky, prints well enough
cons: still need ISO to clean it, dries tacky afterward, requires a ton of UV time to cure, only seems to cure in direct sunlight
if this was half the price of the elegoo id consider it again
Pass
- 1
- 1
-
-
54 minutes ago, reynor said:
Alright cool thanks. Should I DM you for a quote on how much it will cost to print?
Yes please.
- 2
- 1
Scott's PorchCon June 25, 2022
in Game Night
Posted
An all day gaming and BBQ bonanza.
My house. Vancouver, WA
June 25.
I'll supply the burgers and dogs and the tables. You bring the games, the chairs, and the sides.
Reply here so I can provide enough food.
(Yes, I already cleared it with my wife. She'll be out of town)
Nerd up!