scottshoemaker

* Kids got older older and things like cars, college, etc.  Bye bye GW

This

How about this instead

Here’s my Necromunda terrain

Im shameless

I can’t take credit for the last table.  That’s all evilbryan

I would get an inexpensive airbrush to start with.  Make sure you actually enjoy airbrushing before you make a huge investment.  I started with with this:

https://www.amazon.com/Master-G23-Multi-purpose-Dual-action-Airbrush/dp/B001L4S3KS/ref=sr_1_2_sspa?crid=PPI0E7BHSZ40&keywords=tcp+global+airbrush&qid=1698075226&sprefix=tcp+global+airbrush%2Caps%2C146&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

The needles tips are easily bent. But otherwise its serviceable.  Learn on it, then upgrade to a nice Badger later.

A Harbor Freight compresser is a good start, totally serviceable.  If you can afford one with a tank that's what you want. The tank help with pressure spikes. Just get a decent moisture trap.  Like most things the least interesting things contribute more to success than you'd think. 

Primaris jump packs

Client provided files

Deathwatch bits and bobs!  
Client provided files

To address 3,4, and 5

From the Campaign Rules

There will be no access to any purchase lists from any source once the campaign starts. 

There will be no access to new gang members

There will be no access to new Hired Guns

Territories will not be used.  Booby Traps and Gang Terrain items will have no affect

Credits will not be generated or gained from scenarios.

No vehicle rules or Ash Waste upgrades will be used.

There are no restrictions on any books to use. There are certain restrictions on gangs as noted in in the Where do I Find My Gangs Rules section.

I believe the Enforcers rules in the Boxset are the latest incarnation.

The campaign started 5 days ago.  The thread is here:

Alpharius! Omegon! Who knows? 
client provided files

More Necron goodies.

client provided files

Necron goodies!
Client provided files

Whelp, those are a bust.  Too expensive.  Back to the drawing board.

Nope

Wrong again

Wrong thread

The intent is for low cost tournament sets.  Your points are great and I'm working on new items for my standard line that are more in line with your suggestions.

Hi all,

I'm developing a terrain set that meets the Leviathan Tournament recommendations with the limitation that it be under $100 for the foundation set.  No small feat.  Before I get too far in the process I'd like to hear from the community what you'd like see.

Some points I've factored in:

Flat pack- A panel and clip design so that it may be stored away easily

Flexibility- Standard sizes and shapes to allow for various configurations

Laminated Construction- 3d printing only the surface veneers and laminating them to another material saves time and cost.

Interoperability- Meshes in dimension and design to work not only with my terrain line, but with GW terrain.

I'd like to hear your needs.

These are neat

https://cults3d.com/en/3d-model/game/neo-jetpack-pattern-p-pre-supported

Oh, yeah, designed to be press fit at the corners. I made the clearance just enough. They can still be glued, but don't have to be.

New Leviathan Tournament compatible terrain prototype.  This is the initial proof of design. The goal is to have short, medium & tall panels at 50, 100, and 150mm widths with open doors and widows on select panels.  These have been designed to the same height standards GW uses on its terrain, and is compatible with my terrain line.

Each panel consists of an A & B side to maintain a good appearance and minimizing layers lines.

More to come

Just as a reminder to folks, all offical Campaign Information is posted here:

Lotsa talk but I only see 4 gangs signed up! Without participation things don't happen!

No.  I’ve gotten good at estimating what I can print based on what’s left on the spool.  I’m usually within a meter.

Just run your machines 24/7.  Your spools never have time to absorb moisture.  That’s what I do.