Kelbesq

I highly recommend www.reddit.com/r/ender3 for ender3 specific debug and questions. I personally like Hatchbox PLA. Most good brands are about the same in terms of overall quality, but they all are slightly different. It's more important to pick a brand, learn it's quirks, and then stick with it.

Inventory/prices updated. (All terrain has sold).

Inventory/prices updated.

Updated. Marked a few items as sold Added a few misc items

It's finally time to admit that I have stopped playing Kill Team. My friend who got me into the game quit ~ 6months ago, and I have slowly been playing less and less since. Hopefully these can find a good home! I'd like to keep the Kill teams together, but I will consider parting them out. I have all bits for all of the unbuilt items lists, many of which are still on the sprue. Any item listed as "primed" is zenithal primed with an airbrush. All built minis have a small magnet in the base for transport, unless otherwise noted. Pictures and more details available on request. Prices are negotiable. All items were bought new in-box/on-sprue within the past 2 years. Kill Team items for sale Adeptus Mechanicus - whole lot for $135 3x boxes of 10x Skitarri Rangers/Vanguards - ~20 built, all built units are primed, ~10 fully painted 2 extra Plasma Calivers - 1x greenstuff cast, and 1x 3d printed. 2x boxes of 5x Sicarians - ~5 built + primed 1x Tech-priest Dominus - built 1x Tech-priest Manipulus - built, but missing base. 8x Negavolts cultists (used as elector-priest proxys) - built and primed Tactics cards and tokens from the original starter Tactics cars from the elites box. Drukhari - whole lot for $105 box of 10x Wyches - ~8 built + primed box of 10x Kabalite Warriors - ~5 built + primed 2x boxes of 5x Wracks - ~8 built + primes box of 5x Mandrakes - all built, 1 painted, rest primed box of 5x Incubi - built + primed 1x Grotesque - not assembled. Tyranids - whole lot for $120 quick built box of 5x Termagants - fully painted box of 12 Hormagaunts - fully painted box of 8x Genestealers - fully painted box of 3 warriors - 2 fully painted, 1 primed 1x Broodlord - built box of 3 x Raveners - built, 1 primed. 1x Lictor - fully painted tokens and tactics cards from the boxed set. Rules etc Core rule book - $20 Arena boxed set - $50 Elites rule book - $20 Terrain Original starter set terrain and board - built and fully painted - $50 Sector Mechanicus boxed set terrain + board - built, partially magnetized - $55 Galvanic Magnavent - partially assembled - $40 Misc Deathwatch Kill team - New on sprue/in box - $20 Savage Orruks - new on sprue/in box - $25 (restating from above) I'd like to keep the Kill teams together, but I will consider parting them out. I have all bits for all of the unbuilt items lists, many of which are still on the sprue. Any item listed as "primed" is zenithal primed with an airbrush. All built minis have a small magnet in the base for transport, unless otherwise noted. Pictures and more details available on request. Prices are negotiable. All items were bought new in-box/on-sprue within the past 2 years.

I confirmed this is still happening. More info is here: https://leestrenge.wordpress.com/geeks-and-games-july-20th-arena-kill-team-tournament/

I'll be there for Kill Team!

I'll be there for Kill Team!

I haven't played AoS in over a year, and my main opponent has stopped playing. With the new battletome on the horizon, I figured it would be a good time to start looking for buyers. Unless otherwise stated, all minis are built, unpainted, and extra bits have been saved. In some cases, parts have been Blu-tac'd instead of glued for easier painting. Prices are negotiable. I would *strongly* prefer not to ship these in any way, as they are fairly fragile. 48x Dryads roughly half are painted - $20 for 16. 2x Branchwyches - $10 each 1x Branchwraith - $10 5x Tree Revenants - $20 for a unit of 5 6x Kurnoth Hunters all weapons included, but not glued - $30 for a unit of 3x Treelord Ancient - $25 Spirit of Durthu - $25 I'll sell the whole lot for $200 (or make an offer) and include the storage bin I've been using. The storage bin has a metal sheet glued to the bottom and the bases have all been magnetized.

Most printers can print multiple parts simultaneously. FDM printers, like the Ender 3, will take ~2x longer to print 2 parts than a single part. But it is still useful as you can start of batch of a few items before bed, or before work etc and have them all done at once. You also save on setup, warm up, and cool down time. Printing parts that take 30 minutes each one at a time is just annoying and has some overhead. DLP printers, like the Photon, can print multiple parts at the same time without slowing down. They print an entire layer at once, so it's much more efficient to put as many parts as you can in one print. They also have much smaller print beds, however.

I'll be there for Kill Team!

Here is the STL for the Dunecrawler: https://www.thingiverse.com/thing:2882646 Many of the AdMech models on thingiverse are TTS rips, and wont really work for printing. I've started remeshing/modeling a few and am currently working on Kastelans:https://www.thingiverse.com/thing:3629027 Thanks for the feedback on the Photon. And you are absolutely right that a Photon + Ender is cheaper than a Prusa...

Awesome! What's dealing with resin like in practice? I've been debating a Photon as well. I promised myself I would get one if I learned modeling well enough to justify it. You can push the Ender pretty hard, but to really reach it's limits for minis you need to swap nozzles around, and then it becomes a PITA to swap back for for terrain. At that point a 2nd ender almost makes sense, but for a few hundred more.... Yeah the ender will never be good enough to replace a resin printer. For terrain, tanks, and functional prints, the Ender is amazing for the cost. Here is a Dunecrawler I printed with minimal effort: Sure, it could use some cleanup, and there are some flaws, but for the time invested it turned out pretty solid. Most of the larger pieces are printed at 0.20mm layer height as well.

How late do folk usually stay? It's a bit of a struggle to get across the river after work.

Some action shots from the Orcs vs Drukhari Kill Team Game. We played at 125 points. I was running: Hekatrix 3x Wych Fighters 2x Wyches Nightfiend 4x Mandrakes

Hi new to the forums, but I've been using my Ender 3 for 3-4 months now. I've mostly printed terrain, some tank sized units, and I am still dialing in printing for smaller minis. As to the Ender 3 vs Prusa mk3: They both are capable of great prints, but the Ender 3 needs a little bit more love and tinkering. The Prusa is very reliable, feature rich, and great out of the box. You can certainly upgrade the Ender 3 to do most of what a Prusa can do, and probably at a lower cost, but you'll need to put in some elbow grease to get there. That's not to say the Ender 3 garbage out of the box. I was printing within 2 hours of opening mine.

Awesome work! Have you found this method of completing a unit or two to work well at balancing life with painting?